碱消解-高效液相色谱-电感耦合等离子体质谱法测定生物样品中的甲基汞和乙基汞   总被引：7，自引：2，他引：5  

杨红霞  刘崴  李冰 《岩矿测试》2008,27(6):405-408

建立了碱消解-高效液相色谱-电感耦合等离子体质谱联用系统测定生物样品中甲基汞(MeHg)与乙基汞(EtHg)的分析方法。为提高灵敏度,选用微流量的PFA雾化器,在优化的检测条件下,MeHg及EtHg检出限可达到0.036μg/L和0.03μg/L;线性范围达到4个数量级,两条工作曲线线性相关系数为1。对1.78μg/L MeHg、1.65μg/L EtHg的混合标准溶液重复测定7次,色谱峰面积的相对标准偏差(RSD)分别为1.79%和1.44%。对标准物质BCR 464(金枪鱼)的分析结果表明,测定值与标准值基本吻合,但略低于标准值;甲基汞和乙基汞的加标回收率分别为85.9%和84.5%。高效液相色谱与质谱联用技术的高灵敏度和低检出限能够满足生物样品中汞形态定量分析的要求。  相似文献   

Space–time distribution of ancient and active alluvial karst subsidence: examples from the central Ebro Basin,Spain     

J. L. Simón  M. A. Soriano  L. E. Arlegui  J. Gracia  C. L. Liesa  A. Pocoví 《Environmental Geology》2008,53(5):1057-1065

Space and time variations of alluvial karst subsidence in the central Ebro Basin are analysed in trenches (paleodolines), aerial photographs (historical dolines) and field surveys (present-day active dolines). The measured subsidence rates, as well as a comparison between densities of paleodolines computed in randomly selected scan-lines and density of active dolines computed in maps, suggest that present-day subsidence in favourable areas is more intense than that of Pleistocene times. According to diachronic maps drawn from (a) different aerial photographs taken after 1946 and (b) field surveys on deformations in urbanized areas, subsidence behaved as a nearly steady process while the whole area was used for agriculture. In contrast, rapid changes (through periods of several tens of years) have occurred in urbanized areas, in which dolines expand their boundaries through small marginal collapses, shifting sharply their sinking centres to neighbouring sites. These rapid changes do not have an equivalent in observed paleodolines.  相似文献   

Global Correlations of Ocean Ridge Basalt Chemistry with Axial Depth: a New Perspective   总被引：4，自引：0，他引：4  

Niu  Yaoling; O'Hara  Michael J. 《Journal of Petrology》2008,49(4):633-664

The petrological parameters Na₈ and Fe₈, which are Na₂O andFeO contents in mid-ocean ridge basalt (MORB) melts correctedfor fractionation effects to MgO = 8 wt%, have been widely usedas indicators of the extent and pressure of mantle melting beneathocean ridges. We find that these parameters are unreliable.Fe₈ is used to compute the mantle solidus depth (P_o) and temperature(T_o), and it is the values and range of Fe₈ that have led tothe notion that mantle potential temperature variation of T_P= 250 K is required to explain the global ocean ridge systematics.This interpreted T_P = 250 K range applies to ocean ridges awayfrom ‘hotspots’. We find no convincing evidencethat calculated values for P_o, T_o, and T_P using Fe₈ have anysignificance. We correct for fractionation effect to Mg^# = 0·72,which reveals mostly signals of mantle processes because meltswith Mg^# = 0·72 are in equilibrium with mantle olivineof Fo_89·6 (vs evolved olivine of Fo_{88·1–79·6}in equilibrium with melts of Fe₈). To reveal first-order MORBchemical systematics as a function of ridge axial depth, weaverage out possible effects of spreading rate variation, local-scalemantle source heterogeneity, melting region geometry variation,and dynamic topography on regional and segment scales by usingactual sample depths, regardless of geographical location, withineach of 22 ridge depth intervals of 250 m on a global scale.These depth-interval averages give Fe₇₂ = 7·5–8·5,which would give T_P = 41 K (vs 250 K based on Fe₈) beneathglobal ocean ridges. The lack of Fe₇₂–Si₇₂ and Si₇₂–ridgedepth correlations provides no evidence that MORB melts preservepressure signatures as a function of ridge axial depth. We thusfind no convincing evidence for T_P > 50 K beneath globalocean ridges. The averages have also revealed significantcorrelations of MORB chemistry (e.g. Ti₇₂, Al₇₂, Fe₇₂,Mg₇₂, Ca₇₂, Na₇₂ and Ca₇₂/Al₇₂) with ridge axial depth. Thechemistry–depth correlation points to an intrinsic linkbetween the two. That is, the 5 km global ridge axial reliefand MORB chemistry both result from a common cause: subsolidusmantle compositional variation (vs T_P), which determines themineralogy, lithology and density variations that (1) isostaticallycompensate the 5 km ocean ridge relief and (2) determine thefirst-order MORB compositional variation on a global scale.A progressively more enriched (or less depleted) fertileperidotite source (i.e. high Al₂O₃ and Na₂O, and low CaO/Al₂O₃)beneath deep ridges ensures a greater amount of modal garnet(high Al₂O₃) and higher jadeite/diopside ratios in clinopyroxene(high Na₂O and Al₂O₃, and lower CaO), making a denser mantle,and thus deeper ridges. The dense fertile mantle beneath deepridges retards the rate and restricts the amplitude of the upwelling,reduces the rate and extent of decompression melting, givesway to conductive cooling to a deep level, forces melting tostop at such a deep level, leads to a short melting column,and thus produces less melt and probably a thin magmatic crustrelative to the less dense (more refractory) fertile mantlebeneath shallow ridges. Compositions of primitive MORB meltsresult from the combination of two different, but geneticallyrelated processes: (1) mantle source inheritance and (2) meltingprocess enhancement. The subsolidus mantle compositional variationneeded to explain MORB chemistry and ridge axial depth variationrequires a deep isostatic compensation depth, probably in thetransition zone. Therefore, although ocean ridges are of shalloworigin, their working is largely controlled by deep processesas well as the effect of plate spreading rate variation at shallowlevels. KEY WORDS: mid-ocean ridges; mantle melting; magma differentiation; petrogenesis; MORB chemistry variation; ridge depth variation; global correlations; mantle compositional variation; mantle source density variation; mantle potential temperature variation; isostatic compensation  相似文献   

南海东北部下地壳高速层的成因探讨   总被引：2，自引：0，他引：2  

刘安  武国忠  吴世敏 《地质论评》2008,54(5):609-616

通过对南海北部大陆边缘地壳结构分析,指出南海东北部存在下地壳高速层,大致分布在112°E~120°E,19°N~22°N的陆坡和拉张程度大的陆架地区,呈NEE向延伸,在海底地震仪剖面上最大的厚度有8km,向南海海盆方向减薄。通过对比综合分析认为,高速层物质组成是底侵作用形成的熔岩垫,由于伸展作用,南海海底扩张（30Ma）前后底侵作用形成了熔岩垫,并促使南海北部大陆边缘地壳抬升,导致区域性抬升剥蚀。  相似文献   

松南海坨子—大布苏地区泉四段— 姚家组层序地层研究   总被引：2，自引：1，他引：1  

张永旺  曾溅辉  邓宏文  王红亮  高霞  陈冬  徐志伟 《沉积学报》2008,26(5):737-743

根据工区内现有的钻井、测井和地震资料,应用以多级次基准面旋回为参照面的高分辨层序地层学理论与研究方法,对松辽盆地南部海坨子—大布苏地区的泉四段—姚家组地层进行了详细的层序地层研究,共识别出5个长期基准面旋回（相当于三级层序）,9个中期基准面旋回（相当于四级层序）,建立了研究区的层序划分方案,在连井剖面的层序地层对比基础上,建立了该区的地层格架,并对层序构成特征进行了分析,研究了储集层在层序格架内的分布规律,揭示出浊积砂体和三角洲前缘相的分流河道形成于基准面上升期,三角洲前缘相的河口坝、远砂坝和席状砂沉积形成于基准面下降期,指出浊积砂体和三角洲前缘相的远砂坝、席状砂沉积是研究区形成岩性油气藏的有利储集体。  相似文献   

地幔岩中流体包裹体研究   总被引：5，自引：2，他引：3  

卢焕章 《岩石学报》2008,24(9):1954-1960

地幔岩石中的流体包裹体代表地幔流体的样品。地幔流体包裹体可以存在从地幔来的金刚石,地幔捕虏体和岩浆碳酸岩中。研究这些岩石和矿物中的流体包裹体可以得出其所代表的地幔流体的温度、压力、成分和同位素。我们目前见到的这三类地幔岩石的包裹体主要可在橄榄石、辉石、金刚石、方解石和磷灰石中见到。这些包裹体可以粗略地分为CO2包襄体和硅酸盐熔融体包裹体。又可细分为四类包裹体：（1）富碳酸盐的硅酸盐熔融包裹体。这种包裹体在金刚石、地幔岩捕虏体和岩浆碳酸盐岩中见到,它又可分为结晶质熔融包裹体和玻璃包裹体。（2）CO2包裹体。这种包裹体大多见于地幔捕虏体中,在金刚石和岩浆碳酸岩中也可见到。（3）含硫化物的包裹体。这种包裹体见于地幔捕虏体中,与纯CO2包裹体和含CO2的熔融包裹体共存。（4）高密度的流体包裹体。这种包裹体见于金刚石中,是一种高盐度、高密度的含K、Cl和H2O的流体包裹体,又可分为高卤水包裹体和含卤水的富硅的碳酸盐岩浆包裹体。从对金刚石、地幔捕虏体和岩浆碳酸盐岩中流体包裹体的研究表明,地幔流体存在不均匀性和不混溶性。  相似文献   

1.0GPa和常温至1100 ℃条件下角闪石斜长片麻岩的V_p变化:实验测量与理论计算   总被引：3，自引：0，他引：3  

蒋玺  周文戈  刘丛强  谢鸿森  刘永刚 《岩石学报》2008,24(10)

在1．0GPa、常温至1100℃条件下测量了角闪石斜长片麻岩的纵波速度（Vp）,并统计了不同温度实验产物中各种矿物的体积百分含量。结果显示,1．0GPa下,角闪石斜长片麻岩的Vp首先随温度升高（室温至700℃）缓慢降低约6％,然后（700—850℃）快速降低约6％,再（850～950℃）转而急剧升高15％～25％,最后（T〉950℃）又快速下降。实验产物分析表明在高温高压下α-石英-β石英相变和岩石部分熔融是岩石Vp异常变化的主要因素。由取样产物的矿物含量和弹性参数,计算了各温度条件下岩石的Vp得出与实验测量相同的波速-温度变化趋势,即Vp随温度升高先缓慢降低,接着快速降低后又急剧升高,最后又快速减小。实验测量和理论计算对比研究表明,通过高温高压下岩石中的物相变化观测结果进行岩石波速的计算,是检验岩石弹性波速测量结果和研究地球内部地震波结构的一种有效方法。  相似文献   

南黄海表层沉积物天然湿容重和含水量的分布及其与粒度之间的关系   总被引：2，自引：0，他引：2  

徐善民 《海洋科学》1991,15(3):38-41

本文论述了南黄海表层沉积物天然湿容重和含水量的分布,并利用回归分析的方法讨论了容重和含水量与粒度之间的关系。结果表明,容重和含水量与粘土粒级相关性最好,容重与粘土粒级含量(相似文献   

大型海藻孔石莼抑制浮游微藻生长的原因初探--种群密度及磷浓度的作用   总被引：8，自引：0，他引：8  

南春容  董双林 《中国海洋大学学报(自然科学版)》2004,34(1):48-54

本文以磷浓度和种群密度为变量 ,以亚心形扁藻为浮游微藻代表 ,采用实验生态学手段研究了大型海藻孔石莼与浮游微藻 (亚心形扁藻 )间的竞争。结果显示 ,不论营养盐浓度如何 ,高密度的孔石莼皆能显著抑制浮游微藻的生长。分析显示 ,高密度的孔石莼压制浮游微藻生长的原因 ,不是由于对氮、磷等营养盐的竞争所致 ,而可能是其他原因所致。  相似文献   

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling     

P. Cobo  C. Ranz  A. Fernández  M. Cuesta  D.K. Anthony  M. Siguero 《Marine Geophysical Researches》2005,26(2-4):87-95

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.  相似文献